MERCURY RACING 600 SCI STAGE 1
Description
The Whipple Stage 1 system is a computer recalibration that increases the maximum power by more than 100HP* and 90 pounds of torque*. Whipple also increases the low rpm power range for a significant decrease in plane time and a noticeable gain in acceleration. The factory rpm limiter is also increased, giving customers the ability to greatly increase top speed MPH while running original props. The stock RPM limit of 5400 is modified to 5850rpm where peak power ends.
Key features:
- Hi-performance PCM calibration with MPH gains of 5-8mph**
- Increased horsepower for increased top speed MPH
- Increased low-speed torque for decreased plane time
- Increased low, mid and high speed torque for better acceleration and throttle response
- Increased spark at low and mid speeds for increased engine efficiency
- 5850 RPM limit vs. stock 5400 RPM limit giving increased propping range and increased horsepower
- 91 octane safe (RON+MON)/2
- Stock idle, starting and drive-ability is maintained
*NOTE: PCM'S MUST BE SENT TO WHIPPLE SUPERCHARGERS FOR CALIBRATION SERVICE ALONG WITH RECEIPT, NEW PCM'S ARE AVAILABLE UPON REQUEST. TURN AROUND IS NORMALLY 7-10 DAYS.
**Power levels can vary from engine to engine. Whipple’s performance results were under controlled conditions. All applications can vary.
***Results will vary depending on boat design, propping, atmospheric conditions environment and drivers. Whipple cannot guarantee speed or plane time increases with the many different applications. MPH are helpful rule of thumbs and are in no way guaranteed.
Whipple Superchargers is in no way affiliated with Mercury Marine™ or Mercury Racing™
Details
- 2431
- New
Shipping Information
- Item Requires Shipping
- 10.0 lbs.
- W8.0000” x H8.0000” x L8.0000”