2018-2020 Ford F-150 5.0L Gen 6 3.0L Whipple Supercharger Stage 1 Kit

2018-2020 FORD F-150 5.0L
GEN 6 3.0L WHIPPLE SUPERCHARGER STAGE 1 KIT

If you want the most advanced, most powerful, most upgradeable, and highest-quality bolt-on system available for your 2018-2020 Ford F-150 5.0L, here it is. Whipple Superchargers has once again raised the bar for bolt-on power with the Gen 6 3.0L Stage 1 system. Built for 91 octane or better and real-world truck use, the Stage 1 package delivers up to 725 horsepower and 625 lb-ft of torque at the flywheel with the instant boost, flat torque curve, and drivability that define a Whipple system.

Since 1987, Whipple Superchargers has led the industry in twin-screw supercharging technology. As the first to introduce positive displacement superchargers to fuel-injected platforms, Whipple has built a reputation for bolt-on horsepower, OEM-caliber reliability, and industry-leading thermal efficiency. Designed, manufactured, and assembled in the USA at Whipple Superchargers' facility in Fresno, California, this F-150 system reflects decades of Whipple development across both OEM and high-performance applications.

At the center of the package is the Gen 6 W185ax 3.0L Whipple twin-screw supercharger. The system uses Whipple's oversized Crusher™ air system and unique Roval 150mm inlet design to deliver serious airflow capacity while retaining the stock throttle body in the Stage 1 configuration. The result is strong airflow, excellent street manners, and a clean bolt-on package that delivers the kind of broad torque and instant response Whipple systems are known for.

Thermal control is a major part of the Whipple advantage. The patented dual-core, dual-pass intercooler system routes air through each intercooler twice for industry-leading thermal efficiency. Combined with the oversized heat exchanger and high-flow intercooler pump, the system helps maintain lower air charge temperatures and more repeatable performance than smaller, more restrictive systems.

Nobody puts more time and resources into development than Whipple. The proof is in the product. The key to making such reliable power is the Whipple twin-screw compressor, massive air-to-water intercooler, oversized Crusher air system, and innovative PCM programming that keeps the powertrain safe and secure. Whether you are looking for a daily driver that needs more punch or a harder-charging street truck, the Whipple Supercharger system delivers power from tip-in to redline like no other SC system available today.

Each Whipple system includes the required calibration workflow and the hardware needed for a complete installation, including 56 lb/hr fuel injectors, plug-and-play wiring, and the major components needed for a clean bolt-on package. The included HP Tuners MPVI4 support allows customers to load the Whipple calibration, read and clear codes, and adjust tire and axle settings.

KEY FEATURES

• 50-state legal, CARB EO D-231-71
• Up to 725 HP and 625 lb-ft of torque at the flywheel on 93 octane*
• Fits 2018-2020 Ford F-150 5.0L applications
• Gen 6 W185ax 3.0L Whipple twin-screw supercharger system
• 3.0L displacement is 30% larger than 2.3L roots-type systems, allowing lower power consumption and lower discharge temps to move the same amount of air
• Oversized Crusher™ inlet for maximum airflow capacity and minimal rotor cavitation
• Unique Roval 150mm inlet design works with the stock throttle body in the Stage 1 configuration
• Patented dual-core, dual-pass intercooler system for industry-leading air temps
• Largest air-to-water aluminum bar-plate intercooler in the industry with more than 33% greater size than many competing systems
• Massive oversized aluminum intercooler reservoir for longer, more consistent power levels
• Oversized heat exchanger for increased cooling capacity
• High-flow intercooler pump
• Whipple Superchargers massive oversized intercooled air-bypass system for industry-leading reduction of burst knock and strong fuel economy
• Included HP Tuners MPVI4 support
• MPVI4 supports calibration loading, diagnostics, code reading, code clearing, and tire/axle changes
• 56 lb/hr fuel injectors included
• 3-bar TMAP sensor included
• Self-contained oversized oil system for dramatically reduced oil temperatures in demanding conditions
• More boost at the hit than many smaller systems
• Flat torque curve for incredible acceleration
• Completed installation looks factory installed, not some cobbled together kit with multiple billet adapters
• Kits come complete with all necessary parts and hardware for installation
• Plug-and-play wiring with male and female connections
• Proven 6-rib belt system with heavy-duty spring-loaded tensioner and adjustable idler system
• Available in wrinkle black, polish, Ford textured blue, or custom colors
• Instant boost at the touch of the throttle
• 3 minute pulley changes
• Easy belt changes
• Lightweight pocketed aluminum SC pulley
• Spark plugs included
• Designed, manufactured, and assembled in the USA at Whipple Superchargers' facility in Fresno, California

*Targeted flywheel power range is based on 93 octane testing. Results may differ depending on conditions and modifications.