Siemens Deka 63LB/HR Fuel Injector Set Short - INJ-63S
Fuel Injector Set
INJ-63S
- 63# Siemens Deka Short Injector Set / EV1 / 34.5MM
- Sold in a set of 8
- 80 lb/hr, high-impedance fuel injector with minitimer electrical connector
- Flow balanced to within 2-3%
- Excellent spray pattern and atomization for optimized idle and tuning
Pricing:
$520.00
Description
Whipple Siemens Deka 63LB/HR Fuel Injector Set Short
These injectors flow 63 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! These are standard in many marine applications. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
Specifications:
Fuel Pressure Range: 40-90 psi
Minimum Pulse Width: 1.5 ms
Maximum Duty Cycle: 93%
Coil Impedance: 12.0 ohm
Injector Type: Siemens Deka (short/40mm)
Connector Type: minitimer
Proposition 65
/!\ warningWARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
These injectors flow 63 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! These are standard in many marine applications. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
Specifications:
Fuel Pressure Range: 40-90 psi
Minimum Pulse Width: 1.5 ms
Maximum Duty Cycle: 93%
Coil Impedance: 12.0 ohm
Injector Type: Siemens Deka (short/40mm)
Connector Type: minitimer
Proposition 65
/!\ warningWARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Details
- INJ-63S
- INJ-63S
- Whipple Superchargers
- New
Categories
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W4.0000” x H2.0000” x L8.0000”
- Free Ground Shipping
