LS & LT Supercharger Buyer's Guide

WHICH WHIPPLE FITS YOUR LS OR LT BUILD?

Whipple's twin-screw superchargers deliver immediate boost response and strong power throughout the RPM range. For Chevy LS, LSX, and LT builds, choosing the right system means matching that performance with the correct supercharger configuration, inlet, intercooler, and drive arrangement.

Explore eight Whipple Hot Rod supercharger kits, compare specifications and starting prices, and examine factory engineering drawings to find the right system for your build.

IDENTIFY YOUR CYLINDER HEADS

MATCH THE PORT, NOT JUST THE ENGINE

The cylinder heads installed on your LS engine determine which Whipple intake-manifold configuration you need. Use the diagram to identify cathedral, rectangular, or LS7-style intake ports.

Important: LSX and modified LS engines may use aftermarket or swapped cylinder heads. Verify the actual intake-port configuration against the manifold options available for your selected Whipple supercharger kit.

CHOOSE YOUR SUPERCHARGER LAYOUT

Whipple offers distinct inverted and top-mount Gen 6 3.0L supercharger systems for Chevy LS applications. Each configuration has different packaging, inlet-routing, and installation requirements. Understanding these differences will help you narrow your options before selecting a kit.

INVERTED GEN 6 3.0L

An inverted configuration positions the compressor lower within the assembly, with the intercooler and lid arranged above it. The selected lid affects overall assembly height, making packaging and clearance important considerations.

Different lid configurations allow the system to accommodate different installation requirements. Evaluate the complete assembly rather than relying on compressor dimensions alone.

Chevy / GM LS1, LS3 and LS7 Whipple Gen 6 3.0L Hot Rod Supercharger Kit

TOP-MOUNT GEN 6 3.0L

A top-mount configuration positions the supercharger above the intake manifold, creating a different physical arrangement from an inverted system. This affects overall assembly height, inlet routing, and available hood clearance.

The intercooler, throttle body, and accessory drive must also fit around the engine. Evaluate these components together rather than selecting a system based on displacement alone.

COMPARE WHIPPLE's LS & LT SUPERCHARGER SYSTEMS

Compare eight Whipple LS, LSX, and LT supercharger systems by engine compatibility, layout, inlet configuration, accessory-drive requirements, and key installation considerations. Use this comparison to narrow your options before reviewing individual kits.

Table
SYSTEM / PART NUMBER LAYOUT & INLET ENGINE / HEAD FITMENT DRIVE REQUIREMENTS KEY CONSIDERATIONS
Gen 6 3.0L Inverted — WHR-1200/1210-30 Inverted, front-feed LS3-style rectangular / LS7 Compatible LS, LSA, or Wegner drive required Multiple intercooler/lid options; check assembly height
Gen 6 3.0L Top-Mount — WHR-1000/1010-30 Top-mount, front-feed; left/right options LS1 / LS3 / LS7 Wegner drive required; pulley/belt hardware separate Select inlet direction and intercooler configuration
Gen 6 3.8L Front-Feed — WHR-1000-38-LS Top-mount, left-hand front-feed LS1 / LS3 / LS7 Wegner drive required 3.75-inch intercooler core; check inlet clearance
Gen 6 3.8L Rear-Feed — WHR-1800-38-LS Top-mount, rear-feed LS1 / LS3 / LS7 Whipple drive included; pulley separate 130mm rear-facing inlet; check firewall clearance
Gen 4 2.9L — WHR-1400/1410-29 Top-mount, front-feed LS1 / LS3 / LS7 Camaro/Corvette belt-offset options Confirm belt spacing for the application
W140AX 2.3L — WK-1800 Rear-feed LS1 / LS2 / LS3 / LS6 / LS7 Belt system not included Custom installation and supporting components required
LT Gen 6 3.0L Inverted — WHR-1700/1710-30 Inverted, 112mm front-feed LT1 / LT4 Camaro LT1 / ZL1 belt systems; pulley separate Three intercooler/lid configurations; check assembly height
LT Gen 6 3.0L Top-Mount — WHR-1500-30 Top-mount, 112mm front-feed; left/right LT1 Wegner drive required; pulley separate 3.0-inch or 3.75-inch intercooler; select inlet side

FIND YOUR WHIPPLE LS & LT SUPERCHARGER KIT

Explore Whipple Hot Rod supercharger kits for Chevy LS, LSX, and LT engines. Select a system to review available configurations, included components, and current pricing before ordering.

WHIPPLE LSX POWER ON THE DYNO

See what a Whipple-supercharged 427ci LSX can deliver. Watch Wegner Automotive put a custom-built LSX through its paces on the dyno, demonstrating the horsepower and torque potential of a purpose-built Whipple combination.

LS & LT SUPERCHARGER DIMENSIONS

Review Whipple engineering drawings for Chevy LS and LT supercharger installations, including inverted and top-mount assemblies with different lid configurations. Individual compressor head-unit dimensions are also provided to help evaluate component packaging and installation clearance.

LS Engine Assemblies

ULTRA-LOW LID

3.0L

LS Gen 6 inverted assembly with ultra-low lid.

Camaro LS ultra-low lid assembly dimensional drawing

REGULAR LID

3.0L

LS Gen 6 inverted assembly with regular lid

Camaro LS regular lid assembly dimensional drawing

1-INCH SPACER

3.0L

LS Gen 6 inverted assembly with regular lid and spacer.

Camaro LS regular lid with 1-inch spacer dimensional drawing

W185 TOP MOUNT

3.0L

LS engine assembly with W185 supercharger.

LS W185 assembly engineering drawing

LT Engine Assemblies

ULTRA-LOW LID

3.0L

LT Gen 6 inverted assembly with ultra-low lid.

Camaro LT ultra-low lid assembly dimensional drawing

REGULAR LID

3.0L

LT Gen 6 inverted assembly with regular lid.

Camaro LT regular lid assembly dimensional drawing

1-INCH SPACER

3.0L

LT Gen 6 inverted assembly with regular lid and spacer.

Camaro LT regular lid with 1-inch spacer dimensional drawing

W185 TOP MOUNT

3.0L

LT engine assembly with W185 supercharger.

LT W185 supercharger engineering drawing

Supercharger Head Units

W140AX

2.3L

Used in the WK-1800 (Rear-Feed) system.

W140AX compressor head-unit engineering dimensions

W175AX / W175FF

2.9L

Used in the WHR-1400 / WHR-1410 systems

W175AX / W175FF compressor head-unit engineering dimensions

W185AX GEN 6

3.0L

Used in the WHR-1000/1010 systems

W185AX Gen 6 compressor head-unit engineering dimensions

W235AX GEN 6

3.8L

Used in the WHR-1000 & WHR-1800-38 systems

W235AX Gen 6 compressor head-unit engineering dimensions

READY TO BUILD YOUR LS OR LT?

You've compared the systems and reviewed the engineering. Explore Whipple LS & LT supercharger kits and upgrades to find the right combination for your build.