FUEL INJECTOR SET (80LB/HR LONG)

SIEMENS DEKA 80LB/HR LONG FUEL INJECTOR

These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! These are standard in many custom marine applications. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

• Sold in a set of 8
• 80 lb/hr, high-impedance fuel injector with minitimer electrical connector
• Flow balanced to within 2-3%
• Excellent spray pattern and atomization for optimized idle and tuning

About electrical connectors:

• The USCAR connector is sometimes referred to as EV6, which is a Bosch term for the generation of injector. 
• Jetronic is the older style connector, sometimes referred to by the Bosch generation EV1. 
• Neither EV1 or EV6 is technically correct because those generations of Bosch injectors could come with either connector.  However most EV1’s commonly seen use the Jetronic connector and most EV6’s use the USCAR connector so it’s easy to see the connection.