QUICK SPECS
KEY FEATURES
- Stage 1 gains: up to +80 HP and +100 lb-ft*
- Whipple Monster Cooler - 54% greater volume vs. stock
- Approx. 60 deg F charge temp drop on dyno; 100 deg F+ during steady-state testing
- High-velocity roto-molded cold air intake flows 132% more than stock
- Whipple calibration with refined shift schedule & RPM limits
- Convenience updates: pedal mapping, auto start/stop off, higher speed limit
- Install time approx. 2.25 hours; minimal tools required, no cutting or grinding
- 50-State Legal, CARB Certified
Whipple, known for its industry-leading upgrade systems and technological innovations, now brings the same technology to the 3.5L EcoBoost F-150. The 50-state legal Stage 1 kit combines the Whipple Monster Cooler intercooler, a high-velocity cold air intake, and industry-leading calibration to unlock substantial horsepower and torque - while maintaining OEM reliability and emissions compliance.
The Whipple Monster Cooler provides 54% greater volume and 8% more surface area than stock. Its bar-and-plate construction with offset fin dramatically increases cooling capacity while fitting in the stock location. Dyno testing showed approx. 60 deg F lower temps, with real-world torture testing seeing drops over 100 deg F. Cooler, denser air allows more spark advance, greater oxygen intake, and consistent power under demanding conditions.
The Whipple roto-molded high-velocity air intake was CAD/CDF designed to maximize airflow while reducing restriction. Its gauze-style filter with extra-wide pleats flows 132% more than stock paper filters, further enhancing throttle response and efficiency.
At the core of the Stage 1 kit is Whipple's calibration. Developed with advanced tools and tested extensively, the tune delivers up to +80 HP and +100 lb-ft* while maintaining factory-level safety protections. It optimizes shift schedules, raises RPM limits, refines pedal mapping, and disables auto start/stop. Included Whipple flash tool provides quick file uploads, DTC reading/erasing, live data, and logging features.
Exclusive Features
- Dyno-proven improvements:
- +80 HP / +100 lb-ft peak gains*
- Monster Cooler intercooler upgrade:
- 54% greater volume vs. stock
- Approx. 60 deg F temp drop on dyno
- 100 deg F+ drop during steady-state testing
- Cast high-flow end tanks
- Durable bar-and-plate construction
- Offset fin for max efficiency
- Roto-molded cold air intake - 132% more flow vs. stock
- Whipple 91+ octane calibration
- Refined shift schedule & higher RPM shift points
- Improved throttle response with updated pedal mapping
- Auto start/stop disabled
- Increased speed limiter
- No cutting or grinding required
Installation time: approx. 2.25 hours
50-State Legal, CARB Certified (EO D-231-64)
*Power ratings achieved with 93 octane. Actual results may vary with fuel quality and conditions.
WARNING: CANCER & REPRODUCTIVE HARM
This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.