{"title":"Marine Intercooler Systems \u0026 Parts","description":null,"products":[{"product_id":"whipple-low-profile-cuni-marine-intercoolers","title":"Whipple Low-Profile CuNi Marine Intercoolers","description":"\u003cp\u003eWhipple Low-Profile CuNi Marine Intercoolers are designed for compatible supercharged marine and custom performance applications that need strong charge-air cooling without excessive height. Unlike stacked intercooler layouts that can add unwanted engine height, the Whipple low-profile cooler design places the intercooler core inside the intake manifold to increase cooling surface area while helping preserve valuable top clearance.\u003c\/p\u003e\n\u003cp\u003eWhipple was one of the first to bring advanced cupronickel intercooler technology into high-performance marine supercharger applications. The Whipple Cooler design combines CuNi cupronickel water tanks and passageways with copper air fins to support both corrosion resistance and efficient heat transfer in demanding marine environments.\u003c\/p\u003e\n\u003cp\u003eCupronickel water passages are well suited for harsh marine use because they resist corrosion in brackish lake water and ocean saltwater environments better than aluminum-based cooler designs. Copper air fins help improve thermal efficiency, allowing the cooler to reduce charge-air temperatures and support more consistent power under load.\u003c\/p\u003e\n\u003cp\u003eWhipple low-profile intercoolers are built for compatible applications running a wide range of boost levels in lake, ocean, race, pleasure, and custom performance use. The design is intended to deliver cooler charge air, stronger reliability, and improved durability for properly configured supercharged applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-profile Whipple marine intercooler design\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatible supercharged marine and custom performance applications\u003c\/li\u003e\n  \u003cli\u003eCuNi cupronickel water tanks and passageways\u003c\/li\u003e\n  \u003cli\u003eCopper air fins for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eDesigned to package inside the intake manifold to help preserve top clearance\u003c\/li\u003e\n  \u003cli\u003eSupports improved charge-air cooling for compatible supercharged applications\u003c\/li\u003e\n  \u003cli\u003eBuilt for compatible lake, ocean, race, pleasure, and custom performance use\u003c\/li\u003e\n  \u003cli\u003eUseful for marine and hot rod\/performance builds when supported by the manifold and cooler configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify intercooler configuration, intake manifold compatibility, available engine-compartment clearance, boost range, plumbing requirements, and complete installation requirements before ordering.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180568686914,"sku":"WIC-LP-CUNI","price":4695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646227.jpg?v=1789511599"},{"product_id":"whipple-double-cuni-intercooler-671-1471-whipple-psi-universal","title":"Whipple Double CuNi Intercooler - 671-1471, Whipple, PSI, Universal","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWHIPPLE DOUBLE CuNi INTERCOOLER\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Whipple Double CuNi Intercooler is a large-format marine and custom performance intercooler assembly designed for compatible 671-1471 manifold designs, Whipple applications, PSI applications, racing applications, and other custom supercharged builds. Built around two Whipple cupronickel intercooler cores mounted side-by-side, the Double Whipple Cooler is designed to increase cooling surface area for high-output forced-induction combinations.\u003c\/p\u003e\n\n\u003cp\u003eWhipple Coolers are used by professional marine engine builders and performance shops because of their cooling efficiency, corrosion resistance, and proven durability in demanding supercharged applications. This cooler is intended for properly configured marine, hot rod, racing, and custom performance applications where charge-air cooling capacity and long-term durability are critical.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCuNi MARINE INTERCOOLER TECHNOLOGY\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhipple CuNi intercooler technology uses cupronickel water passages for corrosion resistance in brackish lake water and ocean saltwater environments. Unlike aluminum cores or coated cores that can corrode over time, cupronickel construction is well suited for harsh marine use. Copper-alloy air fins support efficient heat transfer, helping reduce charge-air temperatures and improve cooling performance under load.\u003c\/p\u003e\n\n\u003cp\u003eThe Double Whipple Cooler uses two Whipple cupronickel cores side-by-side to increase available cooling surface area. The core design uses an offset fin layout with a high air-side fin count to increase surface area and support strong charge-air temperature reduction in compatible high-boost applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePERFORMANCE AND DURABILITY\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Whipple cooler design uses rugged bar-plate construction rather than a standard extruded-tube layout. The bar-plate design and TIG-welded construction help the cooler withstand demanding marine and racing use, while cupronickel construction provides improved corrosion resistance and a significantly higher melting point than aluminum.\u003c\/p\u003e\n\n\u003cp\u003eThis cooler is designed for compatible 671-1471 manifold designs, with machining required. It may also be used for custom PSI and racing applications when properly configured by the engine builder or installer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDouble Whipple CuNi intercooler assembly\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatible 671-1471 manifold designs\u003c\/li\u003e\n  \u003cli\u003eUses two Whipple cupronickel intercooler cores side-by-side\u003c\/li\u003e\n  \u003cli\u003eSupports increased cooling surface area for high-output applications\u003c\/li\u003e\n  \u003cli\u003eCupronickel water passages for marine corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCopper-alloy air fins for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eOffset fin core design with high air-side fin count\u003c\/li\u003e\n  \u003cli\u003eRugged bar-plate intercooler construction\u003c\/li\u003e\n  \u003cli\u003eTIG-welded construction for durability\u003c\/li\u003e\n  \u003cli\u003eUseful for compatible marine, hot rod, PSI, racing, and custom performance applications\u003c\/li\u003e\n  \u003cli\u003eMachining required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify manifold design, available space, machining requirements, intercooler layout, plumbing requirements, and complete installation requirements before ordering. This product is intended for compatible custom and performance applications where the installer or engine builder can confirm fitment.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180568883522,"sku":"WIC-DWC-CUNI","price":6095.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646232.jpg?v=1789511600"},{"product_id":"whipple-intercooler-kit-for-mercury-racing-575-sci","title":"Mercury Racing 575 SCI Whipple Hi-Performance Upgrade Kit","description":"\u003cp\u003eThe Whipple Intercooler Kit for Mercury Racing 575 SCI applications is designed to add reliable, charge-cooled performance to the Mercury Racing 575 SCI engine package. Developed by Whipple's EFI and supercharging team, this low-profile intercooler package includes a new intake manifold, Whipple CuNi intercooler core, supercharger pulley, and the hardware required for installation.\u003c\/p\u003e\n\u003cp\u003eThis package is engineered to increase power while maintaining strong reliability on pump gas. With the supplied Whipple ECM recalibration service, the system is designed to compensate for cooler charge air and increased boost. Power increases are listed at nearly 100 HP and 125 lb-ft of torque, while the low-profile design requires only 1.625\" of additional height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eLOW-PROFILE WHIPPLE CuNi COOLER\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Whipple low-profile marine intercooler uses CuNi cupronickel intercooler technology for durability, corrosion resistance, and thermal efficiency in demanding marine environments. Unlike aluminum cores or coated cores that can corrode over time, Whipple CuNi intercooler construction uses cupronickel water passages for corrosion resistance in brackish lake water and ocean saltwater environments.\u003c\/p\u003e\n\u003cp\u003eThe core also uses copper-alloy air fins to support efficient heat transfer. This combination of cupronickel water passages and copper-alloy air fins helps make the Whipple marine intercooler a strong choice for sustained marine performance where durability and temperature control are both critical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePERFORMANCE AND DURABILITY\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Whipple CuNi intercooler core uses an offset fin design with a high fin count on the air side to increase surface area and improve charge-air temperature reduction. The core features a rugged bar-plate design, TIG-welded construction, and a 3-pass water-flow layout designed to make full use of the cooler core under varying water-flow conditions.\u003c\/p\u003e\n\u003cp\u003eCupronickel construction also provides a major durability advantage in harsh environments. Compared with aluminum, cupronickel offers a significantly higher melting point and stronger resistance to corrosion in marine use. This makes the Whipple CuNi cooler well suited for high-load marine supercharger applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eECM RECALIBRATION\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhipple ECM recalibration service is included with this kit. Whipple reflashes the original ECM for proper fuel and spark control to support the intercooler package, cooler charge air, and increased boost level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-profile intercooler kit for Mercury Racing 575 SCI applications\u003c\/li\u003e\n  \u003cli\u003eIncludes intake manifold, Whipple CuNi intercooler core, supercharger pulley, and installation hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned to add only 1.625\" of additional height\u003c\/li\u003e\n  \u003cli\u003ePower increase of nearly 100 HP and 125 lb-ft of torque with proper calibration\u003c\/li\u003e\n  \u003cli\u003eWhipple ECM recalibration service included\u003c\/li\u003e\n  \u003cli\u003eCupronickel water passages support corrosion resistance in marine environments\u003c\/li\u003e\n  \u003cli\u003eCopper-alloy air fins support efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eOffset fin core design with high air-side fin count\u003c\/li\u003e\n  \u003cli\u003e3-pass water-flow design\u003c\/li\u003e\n  \u003cli\u003eRugged bar-plate intercooler construction\u003c\/li\u003e\n  \u003cli\u003eTIG-welded construction for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify engine package, pulley setup, ECM requirements, available engine-compartment height, and complete installation requirements before ordering. ECM recalibration requires sending the applicable ECM to Whipple for service.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Gloss Black \/ Cupronickel (CuNi)","offer_id":56180568981826,"sku":"WC-9062B","price":6595.99,"currency_code":"USD","in_stock":true},{"title":"Hi-Performance Blue \/ Cupronickel (CuNi)","offer_id":67905641120066,"sku":"WC-9062BL","price":6995.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Aluminum","offer_id":67905641152834,"sku":"WC-9062B-AL","price":5595.99,"currency_code":"USD","in_stock":true},{"title":"Hi-Performance Blue \/ Aluminum","offer_id":67905641185602,"sku":"WC-9062BL-AL","price":5995.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646240.jpg?v=1789511601"},{"product_id":"whipple-foac-cuni-intercooler-671-1471-whipple-psi-universal","title":"Whipple FOAC CuNi Intercooler - 671-1471, Whipple, PSI, Universal","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWHIPPLE FOAC CuNi INTERCOOLER\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Whipple FOAC CuNi Intercooler, known as the Father Of All Coolers, is a large-format marine and custom performance intercooler designed for compatible 671-1471 manifold designs, Whipple applications, PSI applications, racing applications, and other custom supercharged builds. Built around one massive 5\" thick core measuring over 10\" wide and 17\" long, the FOAC is intended for high-output forced-induction combinations that require serious charge-air cooling capacity.\u003c\/p\u003e\n\n\u003cp\u003eWhipple Coolers are used by professional marine engine builders and performance shops because of their cooling efficiency, corrosion resistance, and proven durability in demanding supercharged applications. This cooler is intended for properly configured marine, hot rod, racing, and custom performance applications where charge-air cooling capacity, water-flow capacity, and long-term durability are critical.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCuNi MARINE INTERCOOLER TECHNOLOGY\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhipple CuNi intercooler technology uses cupronickel water passages for corrosion resistance in brackish lake water and ocean saltwater environments. Unlike aluminum cores or coated cores that can corrode over time, cupronickel construction is well suited for harsh marine use. Copper-alloy air fins support efficient heat transfer, helping reduce charge-air temperatures and improve cooling performance under load.\u003c\/p\u003e\n\n\u003cp\u003eThe FOAC core uses Whipple bar-plate cupronickel intercooler construction with an offset fin design and 24 fins per inch on the air side, described as similar to running 48 FPI for increased effective surface area. The design is built to maximize thermal reduction in compatible high-boost and high-load applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePERFORMANCE AND DURABILITY\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe FOAC features dual -20AN inlets and outlets to support high water-flow capacity in compatible cooler systems. The rugged bar-plate design and TIG-welded construction help the core withstand demanding marine and racing use better than many traditional extruded-tube cooler designs.\u003c\/p\u003e\n\n\u003cp\u003eCupronickel construction also provides a major durability advantage in high-load environments. Compared with aluminum, cupronickel offers a significantly higher melting point and stronger corrosion resistance for marine intercooler service.\u003c\/p\u003e\n\n\u003cp\u003eThis cooler is designed for compatible 671-1471 manifold designs, with machining required. It may also be used for custom PSI and racing applications when properly configured by the engine builder or installer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFOAC CuNi intercooler, also known as the Father Of All Coolers\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatible 671-1471 manifold designs\u003c\/li\u003e\n  \u003cli\u003eMassive 5\" thick core measuring over 10\" wide and 17\" long\u003c\/li\u003e\n  \u003cli\u003eBar-plate cupronickel intercooler construction\u003c\/li\u003e\n  \u003cli\u003eCupronickel water passages for marine corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCopper-alloy air fins for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eOffset fin design with 24 fins per inch on the air side\u003c\/li\u003e\n  \u003cli\u003eDual -20AN inlets and outlets\u003c\/li\u003e\n  \u003cli\u003eTIG-welded construction for durability\u003c\/li\u003e\n  \u003cli\u003eUseful for compatible marine, hot rod, PSI, racing, and custom performance applications\u003c\/li\u003e\n  \u003cli\u003eMachining required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify manifold design, available space, machining requirements, intercooler layout, plumbing requirements, and complete installation requirements before ordering. This product is intended for compatible custom and performance applications where the installer or engine builder can confirm fitment.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180569637186,"sku":"WIC-FOAC-CUNI","price":6895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646316.jpg?v=1789511609"},{"product_id":"whipple-10an-intercooler-fitting-upgrade-for-mercury-racing-600-662-700-sci","title":"Whipple -10AN Intercooler Fitting Upgrade for Mercury Racing 600\/662\/700 SCI","description":"\u003cp\u003eThe Whipple -10AN Intercooler Fitting Upgrade is a support component package for compatible Mercury Racing 600 SCI, 662 SCI, and 700 SCI applications. This upgrade is designed to improve water flow through the stock intercooler core by replacing the restrictive factory intercooler fitting layout with higher-flow stainless -10AN hardware.\u003c\/p\u003e\n\u003cp\u003eImproved intercooler water flow can help reduce manifold air temperatures and supercharger discharge temperatures. Cooler charge air can support stronger reliability, durability, and power consistency in properly configured marine performance applications, especially when inlet air temperature safety thresholds would otherwise limit power.\u003c\/p\u003e\n\u003cp\u003eThe factory 600 SCI setup uses a small inlet fitting that restricts water flow to the intercooler. The Whipple high-flow fitting uses a tapered internal shape that transitions from .50\" to .75\" to increase water volume capacity. The system also replaces the low-flow cast 90-degree style fitting approach with stainless steel swivel 90-degree radiused fittings to help improve flow.\u003c\/p\u003e\n\u003cp\u003eThis -10AN fitting upgrade is designed to work with the factory 5\/8\" ID hoses, making it a simpler fitting upgrade compared with larger plumbing conversions. Always verify the current hose routing, intercooler configuration, and complete water system layout before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e-10AN high-flow intercooler fitting upgrade\u003c\/li\u003e\n  \u003cli\u003eFor compatible Mercury Racing 600 SCI, 662 SCI, and 700 SCI applications\u003c\/li\u003e\n  \u003cli\u003eDesigned to improve water flow through the stock intercooler core\u003c\/li\u003e\n  \u003cli\u003eStainless steel O-ring-style fittings with tapered internal diameter\u003c\/li\u003e\n  \u003cli\u003eRadiused inlet and outlet shape for improved flow\u003c\/li\u003e\n  \u003cli\u003eStainless steel 90-degree swivel flow fittings\u003c\/li\u003e\n  \u003cli\u003eDesigned to double water volume capacity compared with the restrictive factory fitting layout\u003c\/li\u003e\n  \u003cli\u003eFits with factory 5\/8\" ID hoses\u003c\/li\u003e\n  \u003cli\u003eNew O-rings supplied for each fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify engine application, intercooler configuration, hose size, hose routing, water system layout, and complete installation requirements before ordering. This is an intercooler fitting support upgrade and does not include PCM calibration or a complete performance kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAffiliation note:\u003c\/strong\u003e Whipple Superchargers is not affiliated with Mercury Marine™ or Mercury Racing™.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180570587458,"sku":"MRIC-10AN-600-700","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646403.jpg?v=1789511623"},{"product_id":"whipple-cuni-lee-replacement-intercooler-core","title":"Cupronickel (CuNi) Lee Replacement Whipple Intercooler Core","description":"\u003cp\u003eThe Whipple CuNi Lee Replacement Intercooler Core is designed to replace corroded aluminum Lee cores used in standard 671-1471 4\" Lee intercooler housings. This replacement core is also used in Whipple Double Cooler configurations that place two cores side-by-side for increased charge-air cooling capacity.\u003c\/p\u003e\n\u003cp\u003eWhipple Coolers are used by professional marine engine builders and performance shops because of their cooling efficiency, corrosion resistance, and proven durability in demanding supercharged applications. This core is intended for compatible marine, hot rod, and custom performance builds using the supported Lee intercooler housing configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCuNI MARINE INTERCOOLER TECHNOLOGY\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike aluminum intercooler cores that can corrode over time in harsh marine environments, Whipple CuNi intercooler technology uses cupronickel water passages for corrosion resistance in brackish lake water and ocean saltwater environments. Copper-alloy air fins support efficient heat transfer, helping reduce charge-air temperatures and improve cooling performance under load.\u003c\/p\u003e\n\u003cp\u003eThe Whipple bar-plate cupronickel intercooler design is built for durability and thermal efficiency. The core uses an offset fin design with a high air-side fin count to increase surface area and support strong charge-air temperature reduction in compatible applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePERFORMANCE AND DURABILITY\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement core features dual -20AN inlets and outlets to support high water-flow capacity in compatible cooler systems. The rugged bar-plate design and TIG-welded construction help the core withstand demanding marine and performance use better than many traditional extruded-tube cooler designs.\u003c\/p\u003e\n\u003cp\u003eCupronickel construction also provides a major durability advantage in high-load environments. Compared with aluminum, cupronickel offers a significantly higher melting point and stronger corrosion resistance for marine intercooler service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement CuNi intercooler core for compatible Lee intercooler housings\u003c\/li\u003e\n  \u003cli\u003eDesigned for standard 671-1471 4\" Lee intercooler housings\u003c\/li\u003e\n  \u003cli\u003eReplaces corroded aluminum Lee intercooler cores\u003c\/li\u003e\n  \u003cli\u003eUsed with Whipple Double Cooler configurations using two cores side-by-side\u003c\/li\u003e\n  \u003cli\u003eBar-plate cupronickel intercooler construction\u003c\/li\u003e\n  \u003cli\u003eCupronickel water passages for marine corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCopper-alloy air fins for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eOffset fin core design with high air-side fin count\u003c\/li\u003e\n  \u003cli\u003eDual -20AN inlets and outlets\u003c\/li\u003e\n  \u003cli\u003eTIG-welded construction for durability\u003c\/li\u003e\n  \u003cli\u003eUseful for compatible marine, hot rod, and custom performance applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify Lee intercooler housing compatibility, cooler layout, core dimensions, plumbing requirements, and complete installation requirements before ordering.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180570456386,"sku":"WIC-LEE-CUNI","price":2795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646408.jpg?v=1789511623"},{"product_id":"whipple-12an-intercooler-fitting-upgrade-for-mercury-racing-600-662-700-sci","title":"Whipple -12AN Intercooler Fitting Upgrade for Mercury Racing 600\/662\/700 SCI","description":"\u003cp\u003eThe Whipple -12AN Intercooler Fitting Upgrade is a support component package for compatible Mercury Racing 600 SCI, 662 SCI, and 700 SCI applications. This upgrade is designed to improve water flow through the stock intercooler core by replacing the restrictive factory intercooler fitting layout with higher-flow stainless -12AN hardware.\u003c\/p\u003e\n\u003cp\u003eImproved intercooler water flow can help reduce manifold air temperatures and supercharger discharge temperatures. Cooler charge air can support stronger reliability, durability, and power consistency in properly configured marine performance applications, especially when inlet air temperature safety thresholds would otherwise limit power.\u003c\/p\u003e\n\u003cp\u003eThe factory 600 SCI setup uses a small inlet fitting that restricts water flow to the intercooler. The Whipple high-flow fitting uses a tapered internal shape that transitions from .50\" to .75\" to increase water volume capacity. The system also replaces the low-flow cast 90-degree style fitting approach with stainless steel swivel 90-degree radiused fittings to help improve flow.\u003c\/p\u003e\n\u003cp\u003eThe factory intercooler supply uses 5\/8\" ID hose, while the Whipple -12AN system uses 3\/4\" ID hose to increase flow and reduce pressure loss. Because of the increased water-flow requirement, the -12AN system requires new plumbing for the intercooler supply and outlet, including a dedicated water source. It should not be teed into the factory water system like a stock or -10AN configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e-12AN high-flow intercooler fitting upgrade\u003c\/li\u003e\n  \u003cli\u003eFor compatible Mercury Racing 600 SCI, 662 SCI, and 700 SCI applications\u003c\/li\u003e\n  \u003cli\u003eDesigned to improve water flow through the stock intercooler core\u003c\/li\u003e\n  \u003cli\u003eStainless steel O-ring-style fittings with tapered internal diameter\u003c\/li\u003e\n  \u003cli\u003eRadiused inlet and outlet shape for improved flow\u003c\/li\u003e\n  \u003cli\u003eStainless steel 90-degree swivel flow fittings\u003c\/li\u003e\n  \u003cli\u003e3\/4\" ID high-pressure rubber hose included\u003c\/li\u003e\n  \u003cli\u003eNew O-rings supplied for each fitting\u003c\/li\u003e\n  \u003cli\u003e-12AN thru-hull fitting included\u003c\/li\u003e\n  \u003cli\u003eTransom-mounted stainless steel pickup included\u003c\/li\u003e\n  \u003cli\u003eRequires new intercooler supply and outlet plumbing\u003c\/li\u003e\n  \u003cli\u003eRequires a dedicated water source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify engine application, intercooler configuration, plumbing layout, water source, hose routing, thru-hull\/pickup requirements, and complete installation requirements before ordering. This is an intercooler plumbing support upgrade and does not include PCM calibration or a complete performance kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAffiliation note:\u003c\/strong\u003e Whipple Superchargers is not affiliated with Mercury Marine™ or Mercury Racing™.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180570620226,"sku":"MRIC-12AN-600-700","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646414.jpg?v=1789511623"},{"product_id":"whipple-gm-big-block-671-blower-intake-manifold","title":"Whipple Low Profile GM Big Block Intercooler","description":"\u003cp\u003e\nThe Whipple Low Profile GM Big Block Intercooler combines Whipple's modular 671-based GM Big Block intake manifold with an integrated Whipple Cooler intercooler system. The platform provides a flexible foundation for Whipple twin-screw, Quad Rotor, roots-style, and other compatible forced-induction combinations while maintaining a compact low-profile package.\n\u003c\/p\u003e\n\u003cp\u003e\nThe manifold is compatible with Whipple 3.3L, 3.8L, 4.0L, 4.5L, 5.0L, 8.3L, and Quad Rotor superchargers. With the appropriate billet adapter plate, the 671-based manifold can also support 671 through 1471 roots-style superchargers from manufacturers such as B\u0026amp;M and Weiand.\n\u003c\/p\u003e\n\u003cp\u003e\nCast from high-strength A356-T6 aluminum, the manifold is available for both standard deck (9.8\") and tall deck (10.2\") GM Big Block configurations. The modular design allows the assembly to be configured around the required deck height, finish, supercharger adapter plate, intercooler material, and thermostat housing.\n\u003c\/p\u003e\n\u003cp\u003e\nThe standard Whipple Cooler configuration uses a cupronickel (CuNi) intercooler core. CuNi construction provides excellent corrosion resistance and heat-transfer capability, making it especially well suited to demanding environments including marine applications. An aluminum intercooler core is also available as a lower-cost configuration.\n\u003c\/p\u003e\n\u003cp\u003e\nMultiple billet adapter plate configurations are available to support common supercharger and blower layouts. Depending on the selected configuration, the system can support 671\/871 applications, 1\" offset 1071 applications, B\u0026amp;M 250\/420 applications, and Weiand 256 applications.\n\u003c\/p\u003e\n\u003cp\u003e\nThe low-profile Whipple Cooler architecture helps package the intercooler within the intake manifold while minimizing overall assembly height. Applicable billet adapter plates are machined from 6061-T6 aluminum and are designed to maintain effective airflow distribution through the supercharger and manifold assembly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe 671-based manifold architecture can also be adapted for other forced-induction combinations, including turbocharged or centrifugal-supercharger systems, when used with the appropriate custom adapter.\n\u003c\/p\u003e\n\u003cp\u003e\nFor applicable fuel-injected Whipple supercharger combinations, verify distributor clearance and any required spacer or adapter components before ordering.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-profile Whipple Cooler intercooler and GM Big Block intake manifold assembly\u003c\/li\u003e\n  \u003cli\u003eCompatible with Whipple 3.3L, 3.8L, 4.0L, 4.5L, 5.0L, 8.3L, and Quad Rotor superchargers\u003c\/li\u003e\n  \u003cli\u003eSupports 671 through 1471 roots-style superchargers with applicable adapter plates\u003c\/li\u003e\n  \u003cli\u003eAvailable in standard deck (9.8\") and tall deck (10.2\") configurations\u003c\/li\u003e\n  \u003cli\u003eCupronickel (CuNi) intercooler core standard\u003c\/li\u003e\n  \u003cli\u003eOptional aluminum intercooler core configuration\u003c\/li\u003e\n  \u003cli\u003eNatural, gloss black, and polished finish options\u003c\/li\u003e\n  \u003cli\u003eMultiple billet supercharger adapter plate configurations available\u003c\/li\u003e\n  \u003cli\u003eOptional thermostat housing configurations available for compatible plumbing layouts\u003c\/li\u003e\n  \u003cli\u003e671-based architecture can be adapted for additional compatible forced-induction applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify engine deck height, supercharger type, adapter plate, intercooler material, thermostat housing, distributor clearance, available installation space, and complete installation requirements before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180571078978,"sku":"WC-9000","price":3695.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198650188.png?v=1792005231"},{"product_id":"whipple-big-block-marine-3-piece-o-ring-kit","title":"Whipple Big Block Marine 3-Piece O-Ring Kit","description":"\u003cp\u003eThe Whipple Big Block Marine 3-Piece O-Ring Kit is a replacement O-ring set for compatible Whipple big block non-port-injected manifold applications. This kit is intended for service, replacement, or reassembly of supported Whipple big block marine-style manifold systems.\u003c\/p\u003e\n\u003cp\u003eThe kit includes O-rings for the manifold, supercharger adapter plate, and spacer plate. Each O-ring uses .139\" OD Viton construction for compatibility with the supported Whipple manifold sealing locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement 3-piece O-ring kit\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatible Whipple big block marine-style manifolds\u003c\/li\u003e\n  \u003cli\u003eFor non-port-injected manifold applications\u003c\/li\u003e\n  \u003cli\u003eIncludes O-rings for manifold, supercharger adapter plate, and spacer plate\u003c\/li\u003e\n  \u003cli\u003e.139\" OD Viton O-ring construction\u003c\/li\u003e\n  \u003cli\u003eUseful for service, replacement, or reassembly work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify manifold type, adapter\/spacer plate configuration, O-ring requirements, and Part Number WP-9515 before ordering.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180571242818,"sku":"WP-9515","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646486.jpg?v=1789511631"},{"product_id":"whipple-intercooler-fitting-o-ring-10an-12an","title":"Whipple Intercooler Fitting O-Ring - 10AN\/12AN","description":"\u003cp\u003eThe Whipple Intercooler Fitting O-Ring is a replacement green O-ring for compatible Whipple 10AN and 12AN stainless intercooler fittings. This service part is used with supported Whipple marine, hot rod, and performance intercooler systems where the intercooler fitting O-rings need to be replaced during service, inspection, or reassembly.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is sold individually. Standard Whipple intercooler cores use 2 O-rings per core, while MOAC intercooler cores use 4 O-rings per core. Always verify fitting size, intercooler core type, quantity needed, and Part Number WP-9500 before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement green O-ring for Whipple intercooler fittings\u003c\/li\u003e\n  \u003cli\u003eFor compatible 10AN and 12AN stainless intercooler fittings\u003c\/li\u003e\n  \u003cli\u003eUsed with compatible marine, hot rod, and performance intercooler systems\u003c\/li\u003e\n  \u003cli\u003eSold individually\u003c\/li\u003e\n  \u003cli\u003eStandard intercooler cores use 2 O-rings per core\u003c\/li\u003e\n  \u003cli\u003eMOAC intercooler cores use 4 O-rings per core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify intercooler fitting size, core type, O-ring quantity, and installation requirements before ordering.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180571275586,"sku":"WP-9500","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646487.jpg?v=1789511632"},{"product_id":"whipple-intercooler-core-o-ring","title":"Whipple Intercooler Core O-Ring","description":"\u003cp\u003eThe Whipple Intercooler Core O-Ring is a replacement O-ring for compatible Whipple intercooler cores. This service part is used with supported Whipple marine, hot rod, and performance intercooler systems where the intercooler core O-rings need to be replaced during service, inspection, or reassembly.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is sold individually. Standard Whipple intercooler cores use 2 O-rings per core, while MOAC intercooler cores use 4 O-rings per core. Always verify intercooler core type, quantity needed, and Part Number WP-9501 before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement O-ring for compatible Whipple intercooler cores\u003c\/li\u003e\n  \u003cli\u003eUsed with compatible marine, hot rod, and performance intercooler systems\u003c\/li\u003e\n  \u003cli\u003eUseful for intercooler service, inspection, or reassembly\u003c\/li\u003e\n  \u003cli\u003eSold individually\u003c\/li\u003e\n  \u003cli\u003eStandard intercooler cores use 2 O-rings per core\u003c\/li\u003e\n  \u003cli\u003eMOAC intercooler cores use 4 O-rings per core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify intercooler core type, O-ring quantity, and installation requirements before ordering.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180571308354,"sku":"WP-9501","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198646488.jpg?v=1789511632"},{"product_id":"whipple-4-inch-intercooler-gasket","title":"Whipple 4 Inch Intercooler Gasket","description":"\u003cp\u003eThe Whipple 4 Inch Intercooler Gasket is a replacement intercooler-to-manifold gasket for compatible Whipple 4\" wide intercooler core applications. This paper gasket is intended for service, replacement, or reassembly of supported Whipple intercooler and manifold configurations.\u003c\/p\u003e\n\u003cp\u003eThis gasket is commonly used with compatible Whipple small block supercharger kits, 496 Mag\/Mag HO supercharger kits, and 454\/502\/500 supercharger kits. Because Whipple marine, hot rod, and performance intercooler configurations can vary by manifold and core setup, verify the required gasket, intercooler width, and Part Number WP-9615 before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eApplications Include\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Whipple small block supercharger kits\u003c\/li\u003e\n  \u003cli\u003eCompatible Whipple 496 Mag \/ Mag HO supercharger kits\u003c\/li\u003e\n  \u003cli\u003eCompatible Whipple 454 \/ 502 \/ 500 supercharger kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKey Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement intercooler-to-manifold gasket\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatible Whipple 4\" wide intercooler core applications\u003c\/li\u003e\n  \u003cli\u003ePaper gasket construction\u003c\/li\u003e\n  \u003cli\u003eUseful for intercooler housing service, replacement, or reassembly\u003c\/li\u003e\n  \u003cli\u003eSupports compatible marine, hot rod, and performance applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication note:\u003c\/strong\u003e Verify intercooler width, intake manifold configuration, gasket layout, and installation requirements before ordering.\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":56180571373890,"sku":"WP-9615","price":19.0,"currency_code":"USD","in_stock":true}]},{"product_id":"whipple-gm-big-block-moac-intercooler","title":"Whipple GM Big Block MOAC Intercooler","description":"\u003cp\u003e\nThe Whipple GM Big Block MOAC Intercooler combines Whipple's modular 671-based GM Big Block intake manifold with the MOAC (Mother Of All Intercoolers) intercooler system. The MOAC configuration provides increased intercooler capacity for Whipple twin-screw, Quad Rotor, roots-style, and other compatible forced-induction combinations.\n\u003c\/p\u003e\n\u003cp\u003e\nThe manifold is compatible with Whipple 3.3L, 3.8L, 4.0L, 4.5L, 5.0L, 8.3L, and Quad Rotor superchargers. With the appropriate billet adapter plate, the 671-based manifold can also support 671 through 1471 roots-style superchargers from manufacturers such as B\u0026amp;M and Weiand.\n\u003c\/p\u003e\n\u003cp\u003e\nCast from high-strength A356-T6 aluminum, the manifold is available for both standard deck (9.8\") and tall deck (10.2\") GM Big Block configurations. The modular design allows the assembly to be configured around the required deck height, finish, supercharger adapter plate, MOAC intercooler material, and thermostat housing.\n\u003c\/p\u003e\n\u003cp\u003e\nThe standard MOAC configuration uses a cupronickel (CuNi) intercooler core. CuNi construction provides excellent corrosion resistance and heat-transfer capability, making it especially well suited to demanding environments including marine applications. An aluminum MOAC intercooler core is also available as a lower-cost configuration.\n\u003c\/p\u003e\n\u003cp\u003e\nMultiple billet adapter plate configurations are available to support common supercharger and blower layouts. Depending on the selected configuration, the system can support 671\/871 applications, 1\" offset 1071 applications, B\u0026amp;M 250\/420 applications, and Weiand 256 applications.\n\u003c\/p\u003e\n\u003cp\u003e\nApplicable billet adapter plates are machined from 6061-T6 aluminum and are designed to maintain effective airflow distribution through the supercharger and manifold assembly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe 671-based manifold architecture can also be adapted for other forced-induction combinations, including turbocharged or centrifugal-supercharger systems, when used with the appropriate custom adapter.\n\u003c\/p\u003e\n\u003cp\u003e\nFor applicable fuel-injected Whipple supercharger combinations, verify distributor clearance and any required spacer or adapter components before ordering.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhipple MOAC intercooler and GM Big Block intake manifold assembly\u003c\/li\u003e\n  \u003cli\u003eMOAC (Mother Of All Intercoolers) intercooler configuration\u003c\/li\u003e\n  \u003cli\u003eCompatible with Whipple 3.3L, 3.8L, 4.0L, 4.5L, 5.0L, 8.3L, and Quad Rotor superchargers\u003c\/li\u003e\n  \u003cli\u003eSupports 671 through 1471 roots-style superchargers with applicable adapter plates\u003c\/li\u003e\n  \u003cli\u003eAvailable in standard deck (9.8\") and tall deck (10.2\") configurations\u003c\/li\u003e\n  \u003cli\u003eMOAC Cupronickel (CuNi) intercooler core standard\u003c\/li\u003e\n  \u003cli\u003eOptional aluminum MOAC intercooler core configuration\u003c\/li\u003e\n  \u003cli\u003eNatural, gloss black, and polished finish options\u003c\/li\u003e\n  \u003cli\u003eMultiple billet supercharger adapter plate configurations available\u003c\/li\u003e\n  \u003cli\u003eOptional thermostat housing configurations available for compatible plumbing layouts\u003c\/li\u003e\n  \u003cli\u003e671-based architecture can be adapted for additional compatible forced-induction applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify engine deck height, supercharger type, adapter plate, MOAC intercooler material, thermostat housing, distributor clearance, available installation space, and complete installation requirements before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":67849518154050,"sku":"WC-9000\/9080","price":5991.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198650176.png?v=1792633502"},{"product_id":"whipple-low-profile-mercury-racing-575-sci-intercooler","title":"Whipple Low Profile Mercury Racing 575 SCI Intercooler","description":"\u003cp\u003e\n  \u003cstrong\u003e\u003cu\u003eMERCURY RACING 575 SCI WHIPPLE LOW PROFILE INTERCOOLER\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\nThe Mercury Racing 575 SCI Whipple Low Profile Intercooler is an application-specific Whipple Cooler system designed for the Mercury Racing 575 SCI engine package. The assembly combines a low-profile intake manifold with an integrated intercooler system to provide effective charge-air cooling while minimizing additional engine-package height.\n\u003c\/p\u003e\n\u003cp\u003e\nThis configuration is designed around the 9.80\" standard-deck Mercury Racing 575 SCI application. Finish options include gloss black and Hi-Performance Blue.\n\u003c\/p\u003e\n\u003cp\u003e\nThe standard configuration uses a cupronickel (CuNi) intercooler core. CuNi construction provides excellent corrosion resistance and heat-transfer capability, making it particularly well suited to demanding marine environments. An aluminum intercooler core is also available as a lower-cost configuration.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Whipple CuNi intercooler uses cupronickel water passages and copper-alloy air fins to support both corrosion resistance and efficient heat transfer. The intercooler core uses rugged bar-plate construction with TIG-welded components and a multi-pass water-flow design intended to make effective use of the available cooling surface.\n\u003c\/p\u003e\n\u003cp\u003e\nThe low-profile Whipple Cooler architecture is designed to package the intercooler within the intake manifold while keeping overall engine-package height to a minimum. Optional thermostat housing configurations are available to accommodate different marine cooling-system and plumbing requirements.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication-specific Whipple Cooler system for Mercury Racing 575 SCI\u003c\/li\u003e\n  \u003cli\u003eLow-profile intercooler and intake manifold assembly\u003c\/li\u003e\n  \u003cli\u003e9.80\" standard-deck configuration\u003c\/li\u003e\n  \u003cli\u003eGloss black and Hi-Performance Blue finish options\u003c\/li\u003e\n  \u003cli\u003eCupronickel (CuNi) intercooler core standard\u003c\/li\u003e\n  \u003cli\u003eOptional aluminum intercooler core configuration\u003c\/li\u003e\n  \u003cli\u003eCuNi water passages provide corrosion resistance for marine environments\u003c\/li\u003e\n  \u003cli\u003eCopper-alloy air fins support efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eRugged bar-plate intercooler construction\u003c\/li\u003e\n  \u003cli\u003eOptional thermostat housing configurations available for compatible plumbing layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify Mercury Racing 575 SCI engine configuration, intercooler material, thermostat housing requirements, available engine-compartment clearance, and complete installation requirements before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Gloss Black \/ Cupronickel (CuNi)","offer_id":67906686091586,"sku":"WC-9060B","price":5795.99,"currency_code":"USD","in_stock":true},{"title":"Hi-Performance Blue \/ Cupronickel (CuNi)","offer_id":67906686124354,"sku":"WC-9060BL","price":5995.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Aluminum","offer_id":67906686157122,"sku":"WC-9060B-AL","price":4795.99,"currency_code":"USD","in_stock":true},{"title":"Hi-Performance Blue \/ Aluminum","offer_id":67906686189890,"sku":"WC-9060BL-AL","price":4995.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198650190.png?v=1793035217"},{"product_id":"whipple-moac-mercury-racing-575-sci-intercooler","title":"Whipple MOAC Mercury Racing 575 SCI Intercooler","description":"\u003cp\u003e\nThe Whipple MOAC Mercury Racing 575 SCI Intercooler is an application-specific Whipple Cooler system designed for the Mercury Racing 575 SCI engine package. The assembly combines the Mercury Racing 575 SCI intake manifold configuration with Whipple's MOAC (Mother Of All Intercoolers) intercooler system.\n\u003c\/p\u003e\n\u003cp\u003e\nThis configuration is designed around the 9.80\" standard-deck Mercury Racing 575 SCI application. Finish options include Gloss Black and Hi-Performance Blue.\n\u003c\/p\u003e\n\u003cp\u003e\nThe standard MOAC configuration uses a cupronickel (CuNi) intercooler core. CuNi construction provides excellent corrosion resistance and heat-transfer capability, making it particularly well suited to demanding marine environments. An aluminum MOAC intercooler core is also available as a lower-cost configuration.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Whipple CuNi intercooler uses cupronickel water passages and copper-alloy air fins to support both corrosion resistance and efficient heat transfer. The intercooler core uses rugged bar-plate construction with TIG-welded components and a multi-pass water-flow design intended to make effective use of the available cooling surface.\n\u003c\/p\u003e\n\u003cp\u003e\nOptional thermostat housing configurations are available to accommodate different marine cooling-system and plumbing requirements.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication-specific Whipple MOAC intercooler system for Mercury Racing 575 SCI\u003c\/li\u003e\n  \u003cli\u003eMOAC (Mother Of All Intercoolers) configuration\u003c\/li\u003e\n  \u003cli\u003e9.80\" standard-deck configuration\u003c\/li\u003e\n  \u003cli\u003eGloss Black and Hi-Performance Blue finish options\u003c\/li\u003e\n  \u003cli\u003eMOAC Cupronickel (CuNi) intercooler core standard\u003c\/li\u003e\n  \u003cli\u003eOptional aluminum MOAC intercooler core configuration\u003c\/li\u003e\n  \u003cli\u003eCuNi water passages provide corrosion resistance for marine environments\u003c\/li\u003e\n  \u003cli\u003eCopper-alloy air fins support efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eRugged bar-plate intercooler construction\u003c\/li\u003e\n  \u003cli\u003eOptional thermostat housing configurations available for compatible plumbing layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify Mercury Racing 575 SCI engine configuration, MOAC intercooler material, thermostat housing requirements, available engine-compartment clearance, and complete installation requirements before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Gloss Black \/ Cupronickel (CuNi)","offer_id":67906688221506,"sku":"WC-9060B\/9080","price":7091.99,"currency_code":"USD","in_stock":true},{"title":"Hi-Performance Blue \/ Cupronickel (CuNi)","offer_id":67906688254274,"sku":"WC-9060BL\/9080","price":7291.99,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Aluminum","offer_id":67906688287042,"sku":"WC-9060B\/9080-AL","price":6395.99,"currency_code":"USD","in_stock":true},{"title":"Hi-Performance Blue \/ Aluminum","offer_id":67906688319810,"sku":"WC-9060BL\/9080-AL","price":6595.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198650186.png?v=1793035222"},{"product_id":"whipple-cooler-ic-2-replacement-intercooler-core","title":"Whipple Cooler IC-2 Replacement Intercooler Core","description":"\u003cp\u003e\nThe Whipple Cooler IC-2 Replacement Intercooler Core is available for compatible Whipple Cooler IC-2 applications requiring a replacement intercooler core.\n\u003c\/p\u003e\n\u003cp\u003e\nThe IC-2 core measures 8\" wide x 2.5\" high x 12\" long and is available in either aluminum or cupronickel (CuNi) construction. Both configurations are supplied in a natural finish.\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement intercooler core for Whipple Cooler IC-2 applications\u003c\/li\u003e\n  \u003cli\u003e8\"W x 2.5\"H x 12\"L core dimensions\u003c\/li\u003e\n  \u003cli\u003eAvailable in aluminum or cupronickel (CuNi)\u003c\/li\u003e\n  \u003cli\u003eNatural finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify core dimensions, intercooler material, and application compatibility before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Aluminum","offer_id":67906692677954,"sku":"WP-9202AL","price":1899.99,"currency_code":"USD","in_stock":true},{"title":"Cupronickel (CuNi)","offer_id":67906692710722,"sku":"WP-9202CN","price":3499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198650192.png?v=1793035226"},{"product_id":"whipple-cooler-moac-replacement-intercooler-core","title":"Whipple Cooler MOAC Replacement Intercooler Core","description":"\u003cp\u003e\nThe Whipple Cooler MOAC Replacement Intercooler Core is designed for compatible Whipple Cooler MOAC (Mother Of All Intercoolers) applications requiring a replacement intercooler core.\n\u003c\/p\u003e\n\u003cp\u003e\nThe MOAC core measures 8\" wide x 3.5\" high x 12\" long and is available in either aluminum or cupronickel (CuNi) construction. Both configurations are supplied in a natural finish.\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement intercooler core for Whipple Cooler MOAC applications\u003c\/li\u003e\n  \u003cli\u003eMOAC (Mother Of All Intercoolers) configuration\u003c\/li\u003e\n  \u003cli\u003e8\"W x 3.5\"H x 12\"L core dimensions\u003c\/li\u003e\n  \u003cli\u003eAvailable in aluminum or cupronickel (CuNi)\u003c\/li\u003e\n  \u003cli\u003eNatural finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify core dimensions, intercooler material, and application compatibility before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Aluminum","offer_id":67906693955906,"sku":"WP-9204AL","price":2499.99,"currency_code":"USD","in_stock":true},{"title":"Cupronickel (CuNi)","offer_id":67906693988674,"sku":"WP-9204CN","price":3999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6002\/9506\/files\/F198650196.png?v=1793035231"},{"product_id":"whipple-cooler-4-inch-aluminum-replacement-intercooler-core","title":"Whipple Cooler 4 Inch Aluminum Replacement Intercooler Core","description":"\u003cp\u003e\nThe Whipple Cooler 4 Inch Aluminum Replacement Intercooler Core is designed for compatible Whipple Cooler applications requiring a replacement 4-inch intercooler core.\n\u003c\/p\u003e\n\u003cp\u003e\nThe aluminum-coated core measures 4\" wide x 2.5\" high x 12\" long and is supplied in a natural finish.\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement intercooler core for compatible Whipple Cooler applications\u003c\/li\u003e\n  \u003cli\u003e4\"W x 2.5\"H x 12\"L core dimensions\u003c\/li\u003e\n  \u003cli\u003eAluminum construction\u003c\/li\u003e\n  \u003cli\u003eNatural finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify core dimensions and application compatibility before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":67906695102786,"sku":"WP-9200AL","price":1095.99,"currency_code":"USD","in_stock":true}]},{"product_id":"whipple-cooler-foac-cupronickel-replacement-intercooler-core","title":"Whipple Cooler FOAC Cupronickel Replacement Intercooler Core","description":"\u003cp\u003e\nThe Whipple Cooler FOAC Cupronickel Replacement Intercooler Core is designed for compatible Whipple Cooler FOAC applications requiring a replacement intercooler core.\n\u003c\/p\u003e\n\u003cp\u003e\nThe cupronickel (CuNi) core measures 10\" wide x 5.0\" high x 18\" long and is supplied in a natural finish.\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement intercooler core for Whipple Cooler FOAC applications\u003c\/li\u003e\n  \u003cli\u003e10\"W x 5.0\"H x 18\"L core dimensions\u003c\/li\u003e\n  \u003cli\u003eCupronickel (CuNi) construction\u003c\/li\u003e\n  \u003cli\u003eNatural finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify core dimensions and application compatibility before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":67906695528770,"sku":"WP-9208CN","price":5699.99,"currency_code":"USD","in_stock":true}]},{"product_id":"whipple-cooler-pi-standard-aluminum-replacement-intercooler-core","title":"Whipple Cooler PI-Standard Aluminum Replacement Intercooler Core","description":"\u003cp\u003e\nThe Whipple Cooler PI-Standard Aluminum Replacement Intercooler Core is designed for compatible Whipple Cooler PI-Standard applications requiring a replacement intercooler core.\n\u003c\/p\u003e\n\u003cp\u003e\nThe aluminum-coated core measures 7.75\" wide x 3.25\" high x 10.25\" long and is supplied in a natural finish.\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement intercooler core for Whipple Cooler PI-Standard applications\u003c\/li\u003e\n  \u003cli\u003e7.75\"W x 3.25\"H x 10.25\"L core dimensions\u003c\/li\u003e\n  \u003cli\u003eAluminum construction\u003c\/li\u003e\n  \u003cli\u003eNatural finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify core dimensions and application compatibility before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Default Title","offer_id":67906695659842,"sku":"WP-9210AL","price":1699.99,"currency_code":"USD","in_stock":true}]},{"product_id":"whipple-cooler-super-moac-replacement-intercooler-core","title":"Whipple Cooler Super MOAC Replacement Intercooler Core","description":"\u003cp\u003e\nThe Whipple Cooler Super MOAC Replacement Intercooler Core is designed for compatible Whipple Cooler Super MOAC applications requiring a replacement intercooler core.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Super MOAC core measures 7.75\" wide x 5.0\" high x 10.25\" long and is available in either aluminum or cupronickel (CuNi) construction. Both configurations are supplied in a natural finish.\n\u003c\/p\u003e\n\u003cp\u003e\n  \u003cstrong\u003e\u003cu\u003eKEY FEATURES\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement intercooler core for Whipple Cooler Super MOAC applications\u003c\/li\u003e\n  \u003cli\u003e7.75\"W x 5.0\"H x 10.25\"L core dimensions\u003c\/li\u003e\n  \u003cli\u003eAvailable in aluminum or cupronickel (CuNi)\u003c\/li\u003e\n  \u003cli\u003eNatural finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e Verify core dimensions, intercooler material, and application compatibility before ordering.\n\u003c\/p\u003e","brand":"Whipple Superchargers","offers":[{"title":"Aluminum","offer_id":67906698871106,"sku":"WP-9212AL","price":2899.99,"currency_code":"USD","in_stock":true},{"title":"Cupronickel (CuNi)","offer_id":67906698903874,"sku":"WP-9212CN","price":5299.99,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/whipplesuperchargers.com\/collections\/marine-intercooler-systems-and-parts.oembed","provider":"whipplesuperchargers","version":"1.0","type":"link"}